• 1 X Wall mounted panel with Chemical Controller, Hydroxzone and Timer
  • 1 X Dynamic Venturi Assembly
  • 1 X Hydroxzone braided supply hose
  • 2 X Hydroxzone check valves
  • 1 X Hydroxzone supply tube ‘T’ piece
  • 1 X Multicyclone
  • 1 Roll Teflon Tape
  • 2 X Chemical injection assemblies
  • 2 X Chemical hose connections kits
  • 2 X Chemical pick up and float piece

Additional materials required, but not supplied in kit

The following items may be required to install the Hydroxypure system but are not supplied in the kit:

  • 40mm/48mm/1½ in or 50mm/63mm/2in pipe and fittings
  • UPVC Pipe Adhesive and Primer
  • Mounting screws for wall mounted panel
  • Cable Ties
  • Hole saw 22mm (55/64 in)

Recommended Tools

The following tools will be required as a minimum for the installation:

  • Cordless Drill
  • Hammer Drill (if mounting on a masonry wall)
  • Philips Head Screwdriver
  • PVC Saw
  • Adjustable wrench 0-25mm (1in) or 10mm (25/64 in) Socket and Multigrips
  • Utility knife